Reasons for Light Bulbs Blowing Out

Have your light bulbs ever gone out or exploded all of the sudden? This happens very rarely, but it can be very frightening. As if the thought of light bulbs dying was not enough, they can also blow out, causing shards and electrified material to be thrown into the room. Let’s look at reasons for light bulbs blowing out.

Reasons for Light Bulbs Blowing Out

Are there legit reasons for light bulbs blowing out? Does this happen to every lightbulb? Is there a way to stop a lightbulb from blowing out completely? Our residential electrician in Pico Rivera can help answer these questions and more. Keep reading our guide to learn more about bulbs, proper wattage, circuitry settings, and more so you can keep your home safe.

Lack of Proper Bulb Insulation

Are your light bulbs blowing out frequently? It’s most likely caused by inadequate insulation. The manufacturer often fails to add enough insulation material to the bulb’s base. The bulb’s base can melt and overheat, and any melted materials can leak out. The entire circuit can overheat and explode almost every time.

Oily Hands Touching the Bulb

Although we don’t think about it, our skin actually makes oils. Every time we touch something, our skin releases oil. You may have noticed that halogen bulbs are sensitive to oil if you put your hands on them. Oil creates a hot spot on the bulb’s surface, and excessive amounts of them can cause it to explode. The oil can crackle and bubble before it explodes.

Bad Sockets

Exploding lightbulbs are often an indication of a larger problem. This could indicate that there is a problem with the socket’s connection. It is important that the connection between the socket and the bulb be tightened as much as possible. This is why it is often necessary to turn the socket a few times in order to fix it.

The electrical current will jump over the socket connection rather than through it when there are loose connections. This can sometimes cause overheating of the surrounding parts which eventually leads to a blowout.

You are Using the Wrong Watts

It is easy to mistakenly match the wrong bulb to the wrong object, causing the wattage requirements for the lamp to go out of control. A label should be attached to every light fixture. This label will indicate where the bulb is to be attached. The label should include the required wattage ratings. This label is useful in determining the correct light bulbs for your fixture.

No label on your light bulbs? Here’s another way to determine the wattage of your bulb so you can satisfy the wattage requirements of your fixture.

Connections are Too Loose

The problem could be with the fixture’s wiring connection. This can cause power fluctuations, as electricity flows through it. Eventually, your light bulbs will burn out and continue to receive too much electricity. It is possible for the lamp holder to spark if there are loose connections. Additionally, power jumps can also be caused by loose connections. This means that electricity doesn’t flow easily. This can lead to overheating and cause the bulb to go out. You must make sure there is no loose connection.

Prevent Bulb Blowouts and Get the Right Circuitry Today

Whether you are dealing with constant bulb explosions or you just experienced your first blowout, it’s important to remember that you don’t have to solve the issue alone. You can invest in a number of our handy electrical services in Pico Rivera, where we provide top-quality customer service to help you with any and all electrical needs. We look forward to helping you keep your home safe and secure!